Features:
Innovative appearance, integrated with new system design
A 17-inch (15.7-inch viewable) FST (Flatter Squarer Tube) CRT
Flicker-free, non-interlaced performance
Easy to use digital user controls
Multifrequency operation
Compliance with Energy Star and NUTEK power consumption guidelines
VESA DDC Plug & Play for instant and easy setup
Universal voltage power supply allows user flexibility and worldwide operation
ISO Standard 9241, Part 3 capability for front-of-screen ergonomics
Operates with many PC systems and the InfoWindow II 3483, 3488-V, and 3489 Modular Display Stations (most VGA, SVGA, and XGA applications will run without modification)
Warranty
3 year Limited customer carry-in exchange
This product replaces
All models of the G70 family (6544)
Packaging
Monitor
Attached tilt-swivel stand
Separate video signal cable
Separate power cord
User's Guide
NOTE: With the exception of U.S. models, user guides and power cords based on the country order code are supplied by distribution centers.
Product Dates
Asia Pacific, Canada, Europe/Middle East/Africa, United States
Announce Date: 15 Apr 1997
Planned Availability Date: 8 May 1997
Latin America
Announce Date: 15 Apr 1997
Planned Availability Date: 12 Jun 1997
Physical, Environmental, and Compatibility Specifications as known at time of announcement:
Weight
39.2 lbs (18.0 kg) Includes the tilt-swivel stand
Height
16.4 inches (417 mm) Includes the tilt-swivel stand
Width
16.8 inches (428 mm)
Depth
17.2 inches (439 mm)
Conservation
Energy can be saved by switching monitors off overnight and whenever they are not in use for extended periods during the day.
Power Requirements
Input voltage - 100-240 V AC, 50/60Hz
Heat dissipation (Maximum) - 340 Btu/Hr
Power consumption (Maximum) - 100 watts
Power consumption (Normal Use) - 90 watts
Power consumption (VESA Standby) - 55 watts typical
Power consumption (VESA Suspend) - 15 watts typical
Power consumption (VESA Off) - < 8 watts typical
Maximum earth leakage current - 0.18 mA at 120 V AC
Actual power consumption depends on the screen mode used, the images displayed, and how user controls are set.
Altitude
3000 m (10,000 ft) maximum
Operating
Temperature: 0 to 40 degrees Celcius
Relative Humidity
10% to 80%
Max Wet Bulb: 27 degrees Celcius
Storage
Temperature: -20 to 60 degrees Celcius
Relative Humidity: 5% to 95%
Max Wet Bulb: 29 degrees Celcius
Shipping
Temperature: -40 to 65 degrees Celcius
Relative Humidity: 5% to 95%
Max Wet Bulb: 29 degrees Celcius
NOTE: The higher level of humidity for shipping allows for condensation but not direct contact with moisture.
Acoustics
Declared acoustical noise emissions LWAD = 4.5 Bels or less. The noise emission level stated is the declared (upper limit) A-weighted sound power level, in Bels, for a random sample of monitors. All measurements are made in accordance with ANSI S12.10, and reported in conformance with ISO 9296.
Emissions
All models meet the Swedish Board for Technical Accreditation (SWEDAC) emission guidelines contained in MPR 1990:10 when tested using the MPR 1990:08 test method.
Ergonomics
Compliance to the International Organization for Standardization (ISO) Standard 9241 Part 3 for front-of-screen ergonomics is provided when the product forms part of an ISO-compliant system.
Regulatory Agency Approvals
CSA C22.2 No. 950 (Canada)
UL 1950 First Edition (US)
SEMKO (Sweden)
FDA/DHHS (US)
DNHW (Canada)
NOM (Mexico)
PTB (Germany)
GS (Germany) (Not 6547-41N)
CE Mark (Europe)
FCC Class B (US)
ICES-003 Class B (Canada)
EN 55022 Class B (Europe)
VCCI Class 2 (Japan)
EMI(B) (Korea)
Hardware Requirements
The G72 Color Monitor is designed to operate with system units or graphic adapters that generate a video output signal that falls within the specifications below:
Max addressability (pels): 1280 x 1024
Horizontal frequency (kHz): 30-69
Vertical frequency (Hz): 50-160
NOTE: Horizontal and vertical sync signal timings are critical in order to achieve acceptable screen images. As a consequence, support for all possible variations in H/V sync timings for any display mode cannot be stated.
National Language Support for Asia Pacific, Canada, Europe/Middle East/Africa, Latin America is a function of the graphic adapter in the system unit and the application or support software.
Software Requirements
The G72 Color Monitor features factory-preset and user-settable display modes. The actual display modes that are used are a function of the attaching system unit, its operating system, and application software.
Factory-preset Display Modes
Addressability Refresh Line Rate VESA
720x400 70Hz NI 31.5KHz DOS prompt
640x480 60Hz NI 31.5KHz -
640x480 75Hz NI 37.5KHz Standard
640x480 85Hz NI 43.3KHz -
800x600 75Hz NI 46.9KHz Standard
800x600 85Hz NI 53.7KHz -
1024x768 75Hz NI 60.0KHz Standard
1024x768 85Hz NI 68.7KHz Standard
InfoWindow II 75Hz NI 41.8KHz -
Factory presets: 9
User locations: 8
Includes one 3270/5250 mode.
NOTE:
NI = Non-interlaced
VESA = Video Electronics Standards Association
The factory-preset modes cannot be overwritten, but any of them can be adjusted to personal choice. The new settings are automatically stored in one of the user locations and are recalled each time that mode is used. The factory settings for the mode in use, if any, can be restored by operating the Geometry Reset control.
It may be necessary to make some adjustments to the displayed picture to compensate for variations in video signal timings. The user controls can be used to make these adjustments.
Compatibility
The monitor is supplied with an attached video signal cable. This cable has the same 15-Pin, D-shell video connector for system unit connection as previous monitors.
Supported systems
The monitor has been tested for compatibility with the following PC systems:
System Video Chip Set
PC Server Cirrus GD 5436 Video
PC Server S3 Trio 64V+Video
PC Server S3 Trio 64V+Graphics Adapter
PC Server Cirrus Logic GD-5436
PC 300 Cirrus Logic GD-5446
PC 300 Cirrus Logic GD-5436
PC 300 Intergraph Intense 3-D
PC 300 S3 Trio 64V+Video
PC 300 Matrox Millenium Graphics Adapter
PC 300 S3 Trio 64V + Graphics adapter
Aptiva SIS 6205 Video
Aptiva ATI Mach64 Video
Thinkpad 380D - Magicgraph 128V Video
The monitor has been tested for compatibility with the following 3270/5250 systems (M/T 3483/3488):
Mode Supported Signal Adapter Refresh Rate ISO Compliant Power Management
2 Yes 96G1999 75Hz Yes Yes
3 Yes 96G1999 75Hz No Yes
4 Yes 96G1999 75Hz No Yes
5 Yes 96G1999 75Hz No Yes
6 Yes 96G1999 75Hz No Yes
If the signal cable adapter (P/N 96G1999) is not used,this mode can be supported at 60Hz refresh rate. The mode will not be ISO compliant, and power management will not function.
The monitor have been tested for compatability with the following Network Stations:
8361-100 (Ethernet)
8361-200 (Token-Ring)
Video Chip Set: S3 Trio 64+
Video Memory: 1MB Standard (upgradeable to 2MB)
A signal cable adapter, part number 96G1999 is required to permit attachment to 3483, 3488-V, and 3489 Modular Display Stations.
Limitations
Not all available display modes run at the high refresh rates necessary for flicker-free performance. Display modes at lower refresh rates are available for compatibility with older graphics adapters and system units.
Supported display modes are a function of the attaching system unit. The full range of display modes available with these monitors may not be available or supported with all combinations of system units, their operating systems, and application software.
Horizontal and vertical sync signal timings are critical in order achieve acceptable screen images. As a consequence, support for all possible variations in H/V sync timings for any display mode cannot be stated.
The number of colors shown in any display mode is not limited by the monitor but depends upon the capabilities of the adapter the monitor is attached to.
The power management function is invoked only after initiating signals are received from the attached system unit and/or graphics adapter. The method used to implement power management follows the Video Electronics Standards Association (VESA) Display Power Management Signalling (DPMS) standard. This standard must also be implemented in the attaching system unit and/or graphics adapter for monitor power management to be effective.
Implementation of monitor Plug and Play follows the Video Electronics Standards Association (VESA) Display Data Channel (DDC) standard. This standard must also be implemented in the attaching system unit hardware and software to be effective.
Not all system units are DDC-enabled. In this situation, the user is required to perform the configuration necessary to obtain optimum performance from the system/graphic adapter/monitor combination.
Cable Orders
A video signal cable is supplied. It is 1.8 meters (6 ft) long with a 15-pin, mini D-shell connector.
|
